Recovery Point’s newest facility is a secure, 115,000 sq. ft. enterprise recovery and hosting center that was purpose-built to mitigate risks associated with any single point of infrastructure failure and to operate on an extended basis without access to municipal utilities. Key features are shown below.
Site Features
• Owner-occupied location with no signage, tenants or public access
• Fenced, 17-acre site with controlled vehicle perimeter
• DOS K12/ASTM M50 anti-ram vehicle perimeter
• Private drainage system – sited above the 100-year flood plain
• More than 400 secure, dedicated parking spaces for clients
• UL Standard 96A Master Label for lightning protection and grounding
• Category 3 (I-105) fully adhered 100mph+ EPDM roof
• Designed to meet GSA ISC Level D blast criteria for occupant protection
Electrical Features:
• Diverse underground conduits from substations to facility CT cabinets
• 2N, interior 15kV transformers (16mW)
• 2N diesel power plants rated for full building load
• Seven-day diesel fuel supply on-site with fuel polishing systems
• 2N UPS with 10-minute battery duration (NOT a flywheel system)
• UL Listed SRG grid in all data centers per IEEE Standard 1100-1992
• Dual cording to client equipment
• All electrical distribution provided on overhead ladder
Mechanical Features:
• 2N, fully redundant chiller plants and distribution paths
• 2N data center CRAC provisioning
• 2N under-floor chilled water systems available for in-row cooling
• Dual-fuel boiler plant – natural gas or diesel
• FM200 systems in all data centers
• Exterior doors meet UL 907 and ASTM 1540 for ballistic and forced entry protection
• Exterior entrances are locked at all times
• Building-wide CCTV, mantraps and full access control systems
• Biometric authentication and full-time escort required for access to data centers
• Full BMS systems to maintain temperature and humidity targets
• 24 X 7 technical support and “Smart Hands” services
• 24 X 7 NOC and data center monitoring
Network Features:
• Carrier neutral access via diversely routed dark fiber to 700+ carriers
• Diverse building entry points and DMARCs
• Dedicated conduit available from street to servers
• Support available for customer-owned satellite facilities
• Diversely routed, dark fiber backbone to alternate Recovery Point site
Recovery Point’s flexible hosting solutions are designed to address a wide range of customer requirements from individual racks to private, build-to-suit data centers. 120V, 208V, 208V 3-Phase and -48VDC power options are available. Standard power provisioning is 10 kVA at each rack. Incremental power and cooling up to 20kVA per rack is readily available. In-row cooling capacity can be used to extend this to approximately 40 kVa per rack, including connections for water-cooled CPUs. Because Recovery Point’s infrastructure was designed to support very high power and cooling loads, significant additional power and cooling capacity exists and can be made available non-disruptively as needs change. Increase your power consumption within your existing footprint or grow into new space efficiently. Recovery Point is able to virtually eliminate wasted rack space and compress client configurations into the most efficient, economical footprints.